(Rev.1) Acceptance Criteria for Centrifugal Pump, HI 14.6 and DIN EN ISO 9906

-

ISO, API, ASME Standard for Centrifugal Pump

  • API STD 682 Pumps - Shaft Sealing Systems for Centrifugal and Rotary Pumps
  • API STD 685 Sealless Centrifugal Pumps for Petroleum, Petrochemical, and Gas Industry Process Service
  • ISO 13709 Centrifugal pumps for petroleum, petrochemical and natural gas industries - Second Edition; Includes Access to Additional Content
  • API STD 610 Centrifugal Pump for Petroleum, Petrochemical and Natural Gas Industries
  • IOGP S-615 Supplementary Specifications to ANSI/API Standard 610 Centrifugal Pumps
  • ANSI/HI 14.6 Rotodynamic Pumps For Hydraulic Performance Acceptance Tests


ISO, API, ASME Standard for Reciporcating Pump

  • API STD 674 Positive Displacement Pumps - Reciprocating
  • API STD 675 Positive Displacement Pumps - Controlled Volume for Petroleum, Chemical, and Gas Industry Services
  • API STD 676 Positive Displacement Pumps - Rotary


SHELL Specification

  • DEP 31.29.00.33-Gen. Shaft sealing systems for centrifugal and rotary pumps (amendments/supplements to API 682)
  • DEP 31.29.02.11-Gen. Pumps - selection, testing and installation
  • DEP 31.29.02.30-Gen. Centrifugal pumps (amendments/supplements to ISO 13709 and IOGP S-615)
  • DEP 31.29.06.30-Gen. Centrifugal submerged motor pumps and electro submersible hydraulic turbines


DIN EN ISO 9906

Reference: https://www.ksb.com/centrifugal-pump-lexicon/measurement-error/191874/



ASME B73.1 / B73.2 / B73.3 call HI14.6

Reference: https://www.ksb.com/centrifugal-pump-lexicon/measurement-error/191874/

Popular posts from this blog

(Rev.1) ISO Standard for General Tolerance of Dimension Inspection

-
ISO 2768-1, General Tolerances - Part 1: Tolerance for linear and angular dimensions without individual tolerance indications ISO 2768-2, General Tolerances - Part 2: Geometrical tolerances for features without individual tolerance indications ISO 13920, Welding - General tolerance for welded constructions - Dimensions for lengths and angles - Shape and position Rev.1 (Nov.10, 2021) The tolerance class shall be stated on the drawing or the contract document. If the tolerance class is not specified, the following class shall be applied as per the common practice. ISO 2768-1, Tolerance Class: m ISO 2768-2, Tolerance Class: K ISO 13920, Tolerance Class: B & F The QC inspector cannot decide the tolerance class for the acceptance criteria. Prior to the dimension inspection, the QC inspector and the buyer's engineer shall discuss the applicable tolerance class. If the discussion is not possible due to the several reason, the applicable tolerance class shall be stated in the i
Read more

(Rev.1) The dimension tolerance for the piping installation and tie-in point

-
What is the applicable standard and tolerance class for the dimension inspection when the specific tolerance is not stated on the approved drawing? What is the standard tolerance for piping installation and the tie-in point? Regarding steel structures and related materials, if specific tolerances are not addressed in the approved drawing or approved ITP (Inspection and Test Plan), the construction tolerances specified in AWS D1.1 (specifically paragraphs 7.21, 7.22, and 7.23) will be applied. For piping, piping installation, tie-in points, and related materials, if specific tolerances are not addressed in the approved drawing or approved ITP, the construction tolerances specified in ASME B31.3 (specifically Paragraph 335, Erection and Assembly) will be applied. - (Rev.1) Typo & Editorial Errors Corrected
Read more